Textbook installation of the secure bar holder on a really picturesque red barn.
In this case, this barn does not have internal stops for the left door. The client wrote me and was going to pick up an extra bar holder to be installed on the left door next to the first bar holder. This would secure the door from being pushed in as well as being pulled out.
I love seeing how people install their secure bar holder kits.
I always sell more bar holder kits than I expect but it is VERY RARE that anyone ever sends me a picture of their final installation.
So today, a buyer sent me a picture of his installation. He left out the standard open bar holder which is JUST FINE. I put mine in because I wanted to have it support the 2×4 when the shed door is open.
Had a nice order from Fort Collins CO today! Thank to the CSU Rams fan (an assumption).
The order was for 4 open bar holders which will look very sharp since they don’t have UGLY exposed screws like the ones you buy in Home Depot or Lowes.
I believe I have a superior design to what is available in the market an I’m 100% American made. I host my web site out of a Houston web hoster. I use wordpress which was designed partly in Houston. I live in Austin TX. They are manufactured in Hutto TX by a little metal working shop.
My customers are helping me “make America great again” by doing the simple act of trading together!
All products gotta start somewhere and so things like 5-star reviews on Amazon are pretty exciting for a brand new product. The RAW Bar holders have not just one, but TWO, 5-star reviews on Amazon as of Jan 8, 2017! Check em out.
When I first made my 2×4 bar holder setup with traditional 2×4 bar holders, I made about 3,000 trips to Lowes and Home Depot trying to find the right stuff (slight exaggeration).
Once I put a handle on my 2×4 bar and I had a nice setup for sliding the bar back and forth and removing, I discovered that there just seemed to be no good way to add something so simple as a padlock.
While a padlock won’t keep VERY determined crooks out of my shed – they could bring a circular saw or saws-all and get in – it would “up the ante” on difficulty at least. In fact if you want to think about security in the correct way, you have to assume it is a bit of a marginal returns versus marginal cost concept. In other words, the value of what you’re protecting must be at least worth the COST to criminals of going for it. If you think about an extreme case, the use of encryption causes crooks to have very expensive ‘cracking’ capability, both in computer hardware, time, and expertise. So the point is to make it hard enough that they’ll just move on to an area where they know the score is easier. That is all.
So here is a bulleted list of the escalation in security and the higher cost (equipment/speed) to break your security for a shed.
Standard shed hardware – Simple crowbar to bust and about 15 seconds.
2×4 bar holder with some jerry rigged lock – electric screwdriver and about 2 minutes.
secure 2×4 bar holder with some jerry rigged lock – crowbar on the lock – 15 seconds.
secure 2×4 bar holder WITH special 2×4 bar holder with lock tab – circular saw on bar – 10 minutes + power source + noise risk.
NOT SOLD YET HERE (as of Dec 2016) – Steel 2×4 bar with Secure 2×4 bar holder kit – Now we are in blow torch territory!
So you see you can make each step harder and by adding a locking tab to the secure bar holder I can make the job quite a bit harder for a crook.
Here is my original closed bar holder drawing with a locking tab:
Here is the secure bar holder kit in action – without a padlock on m own shed. (I do wished I was a better carpenter).
Here is a gallery of my current designs using the secure locking tab:
When I first decided I would use a 2×4 bar to close my shed instead of a combination of a latch and “something” to hold ONE of the doors closed, I went and bought “ordinary” 2×4 bar holders from Lowes or Home Depot (you can also get a traditional 2×4 closed bar holder or a traditional 2×4 open bar holder from Amazon (these are affiliate links)).
I was pretty happy with these for the most part except that I only had a 2×4 to fasten the bar holders to. This meant I had to add extra wide wood pieces so that I could fasten to my shed. Since I did this “post shed construction” it looked like crap – even after I painted it.
I thought it would be really nice if there was a DIFFERENT kind of 2×4 bar holder which could be installed in only a 2×4 width. I couldn’t find one so then I designed one. Since there were both OPEN and CLOSED 2×4 bar holders in market I created a design for BOTH the open and closed in my compact (because it only takes a 2×4 width) and secure (because you can’t unscrew the screws with the bar in place) 2×4 holders.
Notice that since I have the screws UNDER the bar when it is installed you simply cannot use a screwdriver to remove the bar if the bar is in place. I had to create the holes in the front to get a screwdriver through. This is what makes my 2×4 bar holders so much better than the current bunch.
Here are the drawings which I made using only Apple Keynote to create. It was faster than using a 3D drawing program (at least for me).
I ended up with actual products that look like this below: